1 / 2
Henlong 1/16 Jagdpanther Tank Visaton FRS 8 Speaker Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is not "plug and Play. My tank was a 27MHZ version. Along with many other changes, I converted to the 2.4 GHZ version, and cut off all the various bumps and mounts I no longer needed that were in the way. This will fit flat to to the battery box top. The lid has a lip to it to securely fit the case. You can just hot glue the lid to the case, and use some screws to hold the speaker on, or do like I did and rivet it in. I'm doing another version that's more professional with a screw on lid and even more box volume, but need another chassis to try it out on.
- Bonus: Cutting everything flush with the battery box top gives you several chassis cavities that add to the box volume - that's what the holes in the bottom of the box are for. Use some hot glue around the perimeter of those to seal the cavities to the box.
- Bonus: By making the box the same width as the interior of the chassis and using a bit of hot glue on both sides and bottom to hold it in place will significantly stiffen the chassis once the lid is on.
Print instructions
Unassociated tags: R/C
Category: R/C Vehicles