1 / 6
Raspberry Pi-revised Prusa MINI+ display box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Revised Prusa MINI+ display box for RPi.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 702
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Revised Prusa MINI+ display box, designed to fit inside a Raspberry Pi Zero W/W 2.
This is the best and easiest way to make your MINI WiFi connectable with OctoPrint.
You can also check the remixes and choose a design according your taste.
For fixing the RPi board, you will need two M3x8 mm screws. It’s connected to the Buddy control board via two cables - one USB A-to-micro USB for supplying power and one two sided micro USB for data transfer.
IMPORTANT!!!
- Be sure that the micro USB-to-micro USB is DATA cable.
- When adjusting the the position of the display, home the Z-axis first to avoid crashes with the Z stepper motor.