1 / 7
IKEA Veberod Shelf and Drawer clips (prevents OCD flareups) — image 1
1 / 7

IKEA Veberod Shelf and Drawer clips (prevents OCD flareups)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clips for IKEA Veberöd (Veberod) shelving units, to keep the shelves from going too far back.

Rating
0 / 5
Likes
4
Downloads
25
Makes
0
Views
369
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I own a pair of IKEA Veberöd (Veberod) shelves, which I really like. The frames are made out of steel square tubing and the shelves and drawers are made of finished plywood.

https://www.ikea.com/us/en/catalog/products/10343328/

UPDATE: January 18, 2026.

  • Added v1.1 of the clips with thicker backs to better resist creep/deformation.

My only complaint about the shelves is that they don't have stops for the drawers. They ride on steel runners which are open on both ends. Unless I carefully positioned each drawer, they didn't sit flush with the frame which really caused my OCD to flare up.

The clips in this Thing attach to the steel frame behind every drawer and provide a satisfying stop by way of little protrusions or wings, keeping all the drawers aligned and allowing me to sleep at night.

There are three clip styles:

1.Single Clip: Attaches to the frame posts at the back of each drawer. If you have only one Veberöd shelf, you'll need 2 of these single clips per drawer -- 6 in total.

2.Double Clip, with wings: Attaches across the frame posts of two Veberöd shelves which are side-by-side. If, like me, you have this configuration of shelves, you'll need 1 single clip and 1 double clip per row of drawers -- 3 single clips and 3 double clips total.

3.Double Clip, without wings: Like its winged sibling, this clip provides a way to connect two adjacent Veberöd shelves, but are designed to be used on non-drawer shelf rows. They provide additional support without unsightly protrusions.

NOTE:

After a few months using my clips, which I printed in PLA, I noticed that the clips can lose shape due to the constant pressure put on them. As a result, I recommend that they be printed in PETG or similar filament.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40% or greater

Filament: Any PETG

Notes:

In order to prevent the clips from snapping or deforming over time, it's recommended that you print these parts with 40% or greater infill in PETG (rather than PLA)

Category: Household

Tags