3Doodler 2.0 stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A humble attempt for a simpler 3Doodler 2.0 stand, I personally searched Thingiverse for one and I only found the one…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A humble attempt for a simpler3Doodler 2.0 stand, I personally searched Thingiverse for one and I only found the one I 'Remixed', most others that I found were for the original bigger 3Doodler, although I don't know if this is considered a proper remix, as I only took the loop/ring of polygons surrounding the pen, although it's perhaps the most important part :)
The rest of the model is mostly simple extrusions and bevels of the original loop/ring of polygons, I hope someone finds it useful as I did, filament used in pictures is recycled PET from blue bottles from:
http://www.re-filament.com/shop/recycled-pet-filament-from-bottles-bottles.html
Print Settings
Printer Brand:
BCN3D
Printer:
BCN3D SIGMA
Rafts:
Yes
Supports:
No
Resolution:
0.3mm
Infill:
30% Triangular
Notes:
3 top solid layers, 4 shells/parameters, 7 solid bottom layers (to lower center of mass), 20 skirt outlines with 0.0mm offset, 0.50mm extrusion width, retraction enabled, nozzle wipe disabled.
70mm/s print speed, 70% first layer, 75% outer parameter speed, 85% solid infill speed, 200mm/s x/y axis movement speed.
Nozzle temp @ 225c, bed temp @ 70c
Category: Tool Holders & Boxes