1 / 3
Pi Camera Connector Replacement Part (FFC/FPC)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement plastic part for use on a Raspberry Pi with a broken camera connector
- Rating
- 4 / 5
- Likes
- 24
- Downloads
- 349
- Makes
- 1
- Views
- 1,530
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- BSD License
This part can be used to connect a Raspberry Pi camera cable to an FFC/FPC port that has a broken or missing plastic latch. To use, simply insert the camera cable into the port, and then secure the cable by inserting the printable part into the port on the non-contact side of the cable.
The thin section that is inserted into the port is 0.4mm thick, so print with a 0.2mm layer height. I used a 0.4mm nozzle, but any nozzle size should be fine.