Alfawise U30pro Extension Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the cooling fan on my Alfawise U30pro to get some air around the stepper motors when printing ABS, PC-ABS or…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Modified the cooling fan on my Alfawise U30pro to get some air around the stepper motors when printing ABS, PC-ABS or Nylon, so the housing was removed and a 60x20mm fan was added.
Unfortunately, the fan exceeded the total height the feet were capable to handle, so an extension was necessary...
Print 4 of them (used PTFE with 5% in the first 23mm and 20% for the rest in S3D using processes) - one for each feet and you're done!
Adding approx. 25mm to the overall height
Print Settings
Printer:
Alfawise U30pro
Rafts:
No
Supports:
No
Resolution:
0,2mm layer height
Infill:
5% + 20%
Filament:
Nothing special... PTFE Post-Printing
Mounting
remove the original black caps on each feet and press the printed feet in place - the design is done to have a certain amount of friction when applied to avoid dropping out when moved.
That's it!Category: 3D Printer Accessories