Cheshire Collimation Eyepiece for Reflector Telescopes (1.25 in, Optional Crosshairs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collimate your telescope more easily, especially in low light!
- Rating
- 4.984 / 5
- Likes
- 179
- Downloads
- 2,418
- Makes
- 66
- Views
- 6,992
- Reviews
- 61
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal.
Update 02-2025:
Added a version of the eyepiece with crosshairs. Make sure to print in the correct orientation (crosshairs on the build plate)!
Usage Instructions
Install it on your scope then shine a light into the bottom of the eyepiece (on the angled surface) through the hole. You'll see the eyepiece's reflection very clearly in your main mirror when looking through the eyepiece's pinhole, which will help you center the eyepiece in the main mirror by adjusting its collimation screws. If you plan to use the telescope immediately afterwards, I'd suggest shining a red light into it to try to preserve your night vision as much as possible!
Printing Instructions
Print standing up with the front of the eyepiece (the part where you look) on top. Prints without supports but depending on your printer and the material used the underside of the circular opening might need a tiny bit of cleanup. I left mine as-is in the photos. Printed with PETG for heat resistance.