Voron V0.1 extra part cooling fan adapt from Nevermore V5 Duo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra part cooling fan for V0.1 that can mount to the base of Nevermore V5 Duo.
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 193
- Makes
- 0
- Views
- 3,836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
The 2 3010 part cooling fan usually isn't enough when you want to print faster with material like PLA. Since I put my printer outdoor, so I don't want take off the side panel to prevent the dust. So I use the base of https://github.com/nevermore3d/Nevermore_Micro/tree/master/V5_Duo
(specifically: Nevermore_Micro/V5_Duo/Mods/Rear-Backmount-Plenum_by-mvieleers/)
and create a fan shroud than can mount to the Nevermore base.
I use Dragon Hotend with Volcano heat block in my configuration(which longer than standard Dragon) and I use the “fan_shroud.stl”, which will blow few mm above the bed. I made another “fan_shroud_H.stl” which blow 2mm higher if you use standard Dragon. I put the FreeCAD model file in case someone want to modified it.
Printing: I slice it into two parts in superslicer to reduce the overhang, then glue with acetone.