1 / 7
Whale headphone hook — image 1
1 / 7

Whale headphone hook

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the first model I made myself, and I learned a lot about 3D modelling for 3D printing with this one. It is…

Rating
0 / 5
Likes
12
Downloads
48
Makes
0
Views
499
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Share Alike

This is the first model I made myself, and I learned a lot about 3D modelling for 3D printing with this one.

It is made with enough space on the tail for the Sennheiser GSP 500 headset, and has a friction fit for a 18mm shelf.

If you are interested in printing this but need a different size shelf - get in touch and I will see if I can adjust the model.

The splash and eyes I glued into place, since I don't have a multi material extruder.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Supports:

Yes


Notes:

Whale Body:

* I used support enforcers for the mouth and tail tips only, the rest will print fine without supports. * I also made sure the bridging orientation on the mouth is from front to back, to help with the friction fit, as well as reduce overhang from the bridging. * In order to align the seam along the spine of the whale, I rotated the model so the face is to the front of the plate, and set the seam position to rear

Splash

  • This prints very well with only a brim - no supports needed
  • Printed at 0.1mm layer height, which is plenty of detail.
  • I used Fillamentum Crystal Clear Iceland Blue for the one I made, which works really well in my opinion.

Eyes

  • Printed these on finer layer height, since they're so tiny, but it is not necessary.
  • Pick a colour that is a nice contrast to the body colour, for that googly eyes effect

Category: Office

Tags