1 / 3
VW T6 ROOF SKY RAIL FIXATION — image 1
1 / 3

VW T6 ROOF SKY RAIL FIXATION

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

After the insulation of my volkswagen T6 van and in particular the addition of 5mm armaflex on the roof beams, the…

Rating
0 / 5
Likes
12
Downloads
75
Makes
0
Views
824
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

After the insulation of my volkswagen T6 van and in particular the addition of 5mm armaflex on the roof beams, the original fasteners could no longer firmly hold the roof sky rail.

So I made pins further apart to leave enough room for insulation. The pins are also wider to compensate for the wear of the sockets which tend to wear out during disassembly.

I also include a socket model for the standard volkswagen pins because I broke one during a disassembly.Warning this socket is not compatible with the above pin.

I enclose the 360 ° fusion model if you need to adjust the assembly to the tolerances of your 3D printer.


VW T6 FIXATION RAIL CIEL DE TOIT

Après l'isolation de mon van volkswagen T6 et notamment l'ajout d'armaflex de 5mm sur les poutres de toit, les fixations d'origines ne pouvaient plus tenir fermement le rail du ciel de toit.

J'ai donc fait des pions plus éloignés pour laisser assez de place pour l'isolation. Les pions sont aussi plus larges pour compenser l'usure des douilles qui ont tendance à s'user au fil des démontages.

J'inclus également un modèle de douille pour les pions standard volkswagen car j'en ai cassé un lors d'un démontage.Attention cette douille n'est pas compatible avec le pion ci-dessus.

Je joins le modèle fusion 360° si vous avez besoin d'ajuster l'assemblage selon les tolérances de vorte imprimante 3D.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.10 mm detail

Infill:

40

Filament: Prusa PETG

Category: Other

Tags