Hadley Telescope Lens holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Too many lens!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
So in haste I bought 3 of the SVBony lens (23mm, 10mm and 4mm).
The 10mm and 23mm work great. but when i want to switch between each I've got no where to put the other lens.
So I adapted the tripod adaptor from https://www.printables.com/model/236464-hadley-tripod-quick-release-adapter.
This will let you mount it on the planetary holder if you're using a tripod adaptor from https://www.printables.com/model/238016-hadley-tripod-adapter.
I used a .6mm nozzle to print at .4 layer hight.
if standing up right you might need supports. I did.
put if you print on it's back with the big hole up you should be ok.
Im no 3d designer …. its going to be a bit snug. Not like you want it to fall off.