Mini marimba (13 bars)

To build the mini marimba you need fishing line, two floats, a small spring and superglue.

The bars:
Use 50% infill for the bars and print them with detailed quality (0.1mm)
It's important to let the bars cool down before playing (24h should be enough), if you play them before they cool down they will not be in tune.
Filament: Prusament PLA Vanilla White
The bars will be tuned to the fundamental frequency in C-major from G4 to E6.
If you wish to use another color or filament type it might get out of tune.
If you wish to tinker with the tuning there is a python script that can be of use here: https://github.com/EqualsEngineering/3DP_Marimba

Resonance pipes:
The longest pipe is cut in two parts to fit on the printer, superglue them together.
15-20% infill
I used Quality: "Fast - 0.2mm")

Bar holders and resonance pipe holder:
Split in two parts and can be superglued together.

Outer frames:
Have to be turned to fit on build plate.

Assembling:
Let the glued parts dry.
Insert the two bar holders in the square holes of the outer frames (No glue needed).
Place the "resonance pipe holder" in the two cutouts in the middle (No glue needed).
Slide in the resonance tubes (No glue needed).
Assemble the bars to the "bar holders" with fishing line and tighten it with a small spring.

Slide floats on the mallet arms.

Done!

Youtube build video (and im letting a robot play it):
https://youtu.be/cfDg2nb0d1g

*Edit 31 Oct 2021
I used 0.8mm of top and 0.8mm of bottom layer with 2 shells. I haven't experimented with these settings myself so I don't know how it would affect the sound quality.

Print Settings

Printer brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Filament brand:

Prusament

Filament color:

Vanilla White

Filament material:

PLA