Z axis rod guide top for Voxelab Aquila printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed up this Z axis rod guide to mount on the alu profile
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 125
- Makes
- 1
- Views
- 584
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed up this Z axis rod guide to mount on the alu profile using 2 bearings 608 8x22x7 but with one is enough.
It's meant to make the rod straight. When mounting be sure you mount it at the same distance from the side as it is in the bottom. Use reference line (center) on the top to measure.
Printing:
I used 0.2mm layer high on PLA Strongman. I Printed with the Big hole up and the small hole on the bed used some support for the arrow shape.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament:
AzureFilm PLA
blue
Category: 3D Printer Accessories