ZWO 2 inch M42 filter drawer cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover for the ZWO M42 filter drawer. Allows the filter drawer opening to be covered while a filter is not…
- Rating
- 3 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 1
- Views
- 515
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover for the ZWO M42 filter drawer. Allows the filter drawer opening to be covered while a filter is not installed.
This does not hold a filter, it is simply a blank to cover the opening while the filter tray is removed.
Suits this product: https://astronomy-imaging-camera.com/product/zwo-filter-drawer-m42
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20%
Filament: 3D Fillies PETG Black
Notes:
I print this with 4 walls though 2 should be fine.
PLA should be OK as well, though I used PETG for this.
Any layer height should be fine. My Artillery X1 does a nice job with PETG at 0.3mm which is why I went with that. At 30mm/s it printed in under an hour.
I flame the inside to remove any whispy stringy bits - don't need those inside my telescope!
Category: Sport & Outdoors