Vesa Adapter 100 to 200x300
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt a monitor arm to fit a TV Vesa mount
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 365
- Makes
- 1
- Views
- 2,743
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I am using an LG 42" TV as my computer monitor but it has a Vesa 200x300 mount size, so I designed this adapter so I could use my monitor arm which is Vesa 100. You will need to print 2 of these, one for each side since I printed it on an Ender 3 and it needed to fit on the build plate.
Print it with at least 6 walls/top/bottom layers, and 20% infill. I printed it with a carbon fibre PLA, but normal PLA will also work. My TV is 9Kg and it works fine, but if you have a heavier TV use with caution.
You will need to print 4 spacers to go between the TV and the bracket to allow for the heads of the screws that attach this bracket to the Vesa 100 plate. Spacers of about 5mm should do depending on the screws you are using.