1 / 2
M3 Heatset Card Wallet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card wallet (6 cards) with heatset inserts, m3 bolts and improved lever.
- Rating
- 4.25 / 5
- Likes
- 46
- Downloads
- 234
- Makes
- 4
- Views
- 1,998
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
I printed 3Daomm's M3 wallet in december 2021 and had 2 major ideas for improvement:
- Heatset inserts to avoid screwing into plastic. Creep and forces on screws in plastics are not my best friends.
- The lever actually had 7 steps despite being designed for 6 cards leading to odd double stacking of the cards at times.
The outer dimensions of the wallet are: 108,51 mm x 77 mm x 15 mm as shown in the drawing.
For assembly, refer to the GIF.
BOM:
- 4x M3x6 sockethead bolts
- 1x M3x8 sockethead bolt (an M3x10 will also do, it is what I used)
- 5x M3 heatset insert (the really cheap ones)
Planned future versions/improvements
- M2 version
- M3 version using better heatset inserts
- Locking mechanism to eliminate play when closed