1 / 3
Drip Tube Spike 3mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the Blumat Tropf auto water system, a spike to hold the 3mm drip hose just off the top of the soil
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 175
- Makes
- 2
- Views
- 980
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
I needed a spike to hold the Blumat Tropf 3mm drip line that comes off the carrots. These spikes can be printed in just about any material, I used Silk PLA for this test print and it came out fine.
I used 2 shells, 3 layers top and bottom, 15% infill with gyroid pattern.
The U of the spike is actually 3.5mm internal diameter, this is because the OD of the 3mm tube is about 3.48mm.