Jason Voorhees part 4 / IV Chevrons template
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.20 – €0.24 net (excluding VAT)
For file: chevronspart4_0.05mm_PLA_MINI_18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.22 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Jason Voorhees Chevrons template
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 373
- Makes
- 0
- Views
- 1,560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jason voorhees mask part 4/IV template.
people are selling pdf tempates for a few bucks. but i have a printer and spare time :)
I made the template in fusion 360 with the correct dimensions.
how to use:
- Place the template on a paper.
- use a knife to cut through the paper.
- place the chevron on your mask, use a bit of water so it stays in place.
- tape near de edges and remove the paper chevron.
First layer should me 0.1 or less! otherwhise the small corners will round up!