SCP Challenge Coin: MTF Epsilon-11
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.37 – €0.45 net (excluding VAT)
For file: Epsilon-11.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Challenge coin for the SCP Foundation's MTF Epsilon-11 ("Nine Tailed Fox").
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 272
- Makes
- 1
- Views
- 959
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
I recently came across the concept of the challenge coin and thought it would be cool to create some for the SCP Foundation's Mobile Task Forces.
This coin is for members of MTF Epsilon-11 ("Nine Tailed Fox"). SCP logo by Far2; Epsilon-11 logo by SunnyClockwork.
Some notes on the design:
- The coin is 45 mm (just over 1.75") in diameter, providing a balance between reasonable coin size and print resolution, and 2 mm in thickness.
- The coin has the SCP logo on one side and the MTF logo on the other. I would recommend printing with the SCP side down, as this minimizes the amount of printing over thin air involved. Depending on the quality of your filament, you may experience some light stringing between features, but I've found that an Xacto takes care of that fairly easily.
- The recommended parameters (as included in the gcode file) are 0.10 mm layer height, no supports, and 15% infill. Additionally, there are two color changes included- to get the results in the picture, I started with black for the first 0.5 mm, switched to white for the middle 1.0 mm, and switched back to black for the last 0.5 mm.
All currently available coins can be found here; let me know if there are other MTFs whose coins you'd like to see!