Small latch for a custom window shutter (velux window)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a small latch for a custom window shutter in my attic I made on the rush to cut direct light. It may helps…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I needed a small latch for a custom window shutter in my attic I made on the rush to cut direct light. It my helps somebody else.
There is 7 mm height between the reference plane (the wood of the window) and the max of the latch. One nail is enough (2 mm diameter max)
Print in place on the side as shown in the pictures, no supports.
Add a brim for a great adhesion. Do not use pla, It can melt on summer.
I have included a rounded one and the fusion 360 file if needed.
Enjoy !
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
Doesn't matter
Filament: Kima PETG-S PETG Transparent
Notes:
Note: the wood of the shutter was not damaged by the latch, it is just what I found in my workshop, I have to had some fabric to finish it.
Category: Household