1 / 1
Presta tubeless valve pair holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple S clip to hold two Presta bicycle tubeless valve bodies or valve extenders together so they don't get separated.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 71
- Makes
- 2
- Views
- 807
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As seen on Instagram - hold two tubeless valve bodies or valve extenders together so they don't get separated in storage.
Three versions for various printers:
- Prusa MK3S sliced at 0.300mm layer height with PrusaSlicer - 1.13mm wall thickness to print with two walls.
- Prusa Mini sliced at 0.250mm layer height with PrusaSlicer - 0.85mm wall thickness
- Generic printer with a 0.4mm nozzle sliced with Cura - 0.8mm wall thickness
There's no good reason to print at a lower layer height, so just crank up the layer height and have it done sooner. Will work just fine in any rigid filament such as PLA, PETG, ABS/ASA, etc.