1 / 4
DN50 Adapter for DN60 Rainwater Pipe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect a DN60 rainwater pipe to a DN50 HT pipe
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 59
- Makes
- 0
- Views
- 644
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is an adapter to connect a DN60 rainwater pipe to a DN50 HT pipe.
I did not find such a product in the stores, so I decided to design one.
There is 3 models available:
- dn60-dn50-symmetric.stl
Standard adapter (centric and symmetric) - dn60-dn50-asymmetric.stl
Useful if you need a constant distance to the wall - dn60-dn50-offset30.stl
Special version including an offset of 30mm needed in my case
Printing Instructions
Material:
- PETG or ASA recommended
Infill:
- 100%
Support:
- No support is necessary.
- dn60-dn50-symmetric.stl and dn60-dn50-asymmetric.stl include some small support by design for better adhesion which has to be cut off after printing.
- dn60-dn50-offset30.stl includes some support by design to avoid printing issues.