1 / 2
Spider Spatula
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
22.5° Spatula with trusses, optimized for 0.4mm nozzles.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 149
- Makes
- 2
- Views
- 510
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Great for removing skirt lines on smooth PEI without scratching your bed.
If your are not using an Arachne enabled slicer, scale the model by 100% * [line width] / 0.4.
Slice with:
- Enough tops/bottoms to fill completely the spatula end,
- A minimum of two wall lines
- 0.08-0.16 mm layer height
- Thick ≥0.16mm first layer if you want to sharpen it
6 cm wide at the base, 13.5cm long.