1 / 3
Easy Print 1:100 M1A1 Abrams
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I split up m_bergman's M1A1 Abrams into multiple pieces for a cleaner print on FDM printers.
- Rating
- 4.917 / 5
- Likes
- 271
- Downloads
- 1,965
- Makes
- 17
- Views
- 9,053
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of https://www.thingiverse.com/thing:4718232
Print at 0.12mm layer height with supports on build plate.
Assembly instructions (See images below for reference):
- Remove support block from under the back of "Turret Top.stl"
- Superglue "Center Pin.stl" into the hole on the underside of "Turret Top.stl"
- Superglue "Turret Bottom.stl" onto the bottom of "Turret Top.stl"
- Insert the finished turret into "Hull Top.stl"
- Use a soldering iron at low temperature or some superglue to gently fuse "Retention Ring.stl" to the bottom of "Center Pin.stl"Superglue "Hull Bottom.stl" to the bottom of "Hull Top.stl"
- Align and superglue tracks to the hull.
- Insert "Cupola.stl" into the turret (Superglue if needed)
- Superglue "Machine Gun.stl" to the Cupola.
Note: The distance between the custom support and the turret is 0.1mm.
