1 / 6
Box for Bikes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Bike Box:
This is a rugged box for a Bike that can hold a few tools and a tire repair kit.
Print each file once.
(You can but you dont have to print the Klammer)
I used:
- 0.6mm Nozzle (0.4mm is also good)
- 0.3mm Layerheight (0.2mm is also good)
- 3 vertical Walls
- 30-50% Infill
- printed in PETG with PrusaSlicer Settings
- i put supports on the Box Part but they are hard to remove in PETG, maybe bridging is good enough but i wanted to make sure :)
Other Hardware:
- 3x M5x20mm Screws (2 for the Dovetailpart that screws to the Bikeframe (these screws may be already in the Bikeframe))
- 1x M5 Nut
Assembly:
Take two M5X20 screws and bolt the dovetail to the bikeframe.
Put the lid on the box and bolt them together with one M5x20 Screw and 1 M5 Nut.
Make sure that its not to tight, so the lid can open smoothly.
Slide the box on the dovetail, it needs a few times in order to slide good.
Extra:
If you feel like the box opens to easy, you can also print the clip(Klammer) that fits over the lid and holds securly on the box.
A cabletie works to.