Atomrc Dolphin action 2 mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.85 – €3.49 net (excluding VAT)
For file: Main PLA, TPU insert / polilite-pla-with-pace-for-insert_02mm_pla_mini_3h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.17 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 3.44 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
As above, mount for action 2 on the front of Dolphin. 2 options. E: more cooling
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 678
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
As above, mount for action 2 to dolphin fpv wing
E: today while flying was 32 Celcius and my dji action 2 overheated- designed more cooling version
2 options:
- to print with TPU
- to print with polilite pla and install camera in tpu insert.
Print settings for PLA:
- Layer hight 0.2
- Perimeters 1
- Solid layers bottom 1, top-3
- Infill rectilinear 7-10%
- combine infill every 1 layer
- Support for support enforcers only- paint it!
- Speed:
Perimeters 35mms - infill perineters overlap 22%
- Print temp 220 st.C
- Bed 55 st.C
If you appreciate my work you can buy me a coffe https://www.buymeacoffee.com/bunkw420h