1 / 5
Halpern Meier Pyramid stickerless
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix allowing faces to be printed with different colors.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts need to be glued.
BOM (assuming you want to have faces of colours A, B, C and D, inside of colour W):
| N | Part | Colour | Count | Source |
| 1. | 20mm M3 Screws | Any (-: | 4 | drawer with screws (-; |
| 2. | 25.6mm 4 axis skewb/pyraminx core | W | 1 | https://www.printables.com/model/254610-puzzle-cores/files |
| 3. | center x4 * | W | 4 | https://www.printables.com/model/254613-halpern-meier-pyramid/files |
| 4. | face x4 | A, B, C, D | 1 each colour | https://www.printables.com/model/254613-halpern-meier-pyramid/files |
| 6. | cap x12 | A, B, C, D | 3 each colour | this printable |
| 7. | edge x12 | A, B, C, D | 3 each colour | this printable |
*) I recommend doing a test assembly of screw, center and cap (parts 1., 3., 6.) - screw should rotate as smooth as possible, to avoid unscrewing during operation. If your screw has an unusually tall head, you can use modified center bottom pieces (file "center deep").