1 / 29
Battery Powered 10W PWM Fume Absorber V2 — image 1
1 / 29

Battery Powered 10W PWM Fume Absorber V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Standalone fume absorber, board cooler with adjustable air flow

Rating
0 / 5
Likes
4
Downloads
12
Makes
0
Views
199
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

ENGLISH

-------------

I wanted to make a smoke absorber that was powerful enough and could quickly cool down an electronic board after soldering or desoldering with hot air by turning the device upside down and removing the activated carbon filter for more power.

After making V1 with a fan that is always at full power (https://www.thingiverse.com/thing:5418531) and relatively noisy, I wanted to make V2 with a fan speed control

The device is powered with 3 x 18650 batteries in series plugged into a 3s charger module.

Unsolder the potentiometer of the PWM module then connect everything by soldering 5 wires, place the module on its support (part N°13), apply a piece of double-sided tape to the back of part 13 and stick it to the bottom right of part 1.

Bend the rocker switch pins so they don't touch the first battery

For those who have already printed the first version https://www.thingiverse.com/thing:5418531 only print parts 11,12,13,14,15 to upgrade to V2

You will need:

3 x 18650 Li-ion Batteries

1 PWM 2A Motor Speed Controller: https://www.aliexpress.com/item/32953823579.html?spm=a2g0o.order_list.0.0.3ed45e5bKNrVvI&gatewayAdapt=glo2fra

1 fan : https://fr.aliexpress.com/item/1005003098017287.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Activated carbon filter (to be cut to 80x80mm): https://fr.aliexpress.com/item/4001115805094.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 - Voltage display: https://fr.aliexpress.com/item/33016800070.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Lipo 3s charger module: https://fr.aliexpress.com/item/1005004289119373.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Charge indicator (optional): https://fr.aliexpress.com/item/1005002912004040.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

8 or 16 5x1.7mm magnets (depending on the desired magnetic force to remove the filter): https://fr.aliexpress.com/item/1005002226582762.html?gatewayAdapt=glo2fra&spm=a2g0o.9042311.0.0.27426c379qcmyn

1 rocker switch: https://fr.aliexpress.com/item/1005003709990642.html?spm=a2g0o.productlist.0.0.2e0945cejAdSKJ&algo_pvid=c0dc5105-a676-46bf-b97d-dec494b0f314&algo_exp_id=c0dc5105-a676-46bf-b97d-dec494b0f314-56&pdp_ext_f=%7B%22sku_id%22%3A%2212000026890754778%22%7D&pdp_npi=2%40dis%21EUR%21%211.41%211.41%21%210.28%21%21%400b0a187916560893759662381e930a%2112000026890754778%21sea

8 Dia2mm screws for plastic

2 M3x15mm screws + 2 M3 nuts for fixing the holder

2 inserts M3 5x5mm: https://fr.aliexpress.com/item/32966216550.html?spm=a2g0o.productlist.0.0.4a4214a4UIVaQj&algo_pvid=cf267834-84e8-4501-8af5-36a0244b007f&algo_exp_id=cf267834-84e8-4501-8af5-36a0244b007f-40&pdp_ext_f=%7B%22sku_id%22%3A%2266537111182%22%7D&pdp_npi=2%40dis%21EUR%21%211.98%211.98%21%21%21%21%400b0a187916560904046268463e9314%2166537111182%21sea

Optical fiber for the charge indicator: https://fr.aliexpress.com/item/4001091896029.html?spm=a2g0s.9042311.0.0.27426c37DrQOwj

Overall dimensions: 235x75x145mm

Print without support

 

____________________________________________________________________________________________________

FRANCAIS

----------------------

Je voulais faire un absorbeur de fumée assez puissant et qui puisse refroidir rapidement une carte électronique après avoir soudé ou dessoudé à l'air chaud en retournant l'appareil sur son pied et en enlevant le filtre à charbon actif pour plus de puissance.

Après avoir fait la V1 avec un ventilateur qui est toujours à pleine puissance (https://www.thingiverse.com/thing:5418531) et qui est relativement bruyant, j'ai voulu faire la V2 avec un réglage de vitesse du ventilateur

L'appareil est alimenté avec 3 batteries 18650 en série branchées sur un module chargeur 3s.

Dessouder le potentiomètre du module PWM puis raccorder le tout en soudant 5 fils, placer le module sur son support (pièce N°13), appliquer un morceau de scotch double face sur le dos de la pièce 13 et la coller au fond à droite de la pièce 1.

Plier les pins de l'interrupteur à bascule pour qu'ils ne touchent pas la première batterie

Pour ceux qui ont déjà imprimé la première version https://www.thingiverse.com/thing:5418531 imprimer uniquement les pièces 11,12,13,14,15 pour passer à la V2

Vous aurez besoin:

3 Batteries 18650 Li-ion

1 ventilateur: https://fr.aliexpress.com/item/1005003098017287.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Filtre à charbon actif (à découper à 80x80mm): https://fr.aliexpress.com/item/4001115805094.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Contrôleur de vitesse de moteur PWM 2A https://fr.aliexpress.com/item/32953823579.html?spm=a2g0o.order_list.0.0.3ed45e5bKNrVvI&gatewayAdapt=glo2fra

1 Afficheur tension :https://fr.aliexpress.com/item/33016800070.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Chargeur 3s https://fr.aliexpress.com/item/1005004289119373.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

1 Indicateur de charge https://fr.aliexpress.com/item/1005002912004040.html?spm=a2g0o.order_list.0.0.3c605e5bUydQEI&gatewayAdapt=glo2fra

8 ou 16 aimants 5x1.7mm (selon la force magnétique désirée pour enlever le filtre):https://fr.aliexpress.com/item/1005002226582762.html?gatewayAdapt=glo2fra&spm=a2g0o.9042311.0.0.27426c379qcmyn

1 Interrupteur à bascule: https://fr.aliexpress.com/item/1005003709990642.html?spm=a2g0o.productlist.0.0.2e0945cejAdSKJ&algo_pvid=c0dc5105-a676-46bf-b97d-dec494b0f314&algo_exp_id=c0dc5105-a676-46bf-b97d-dec494b0f314-56&pdp_ext_f=%7B%22sku_id%22%3A%2212000026890754778%22%7D&pdp_npi=2%40dis%21EUR%21%211.41%211.41%21%210.28%21%21%400b0a187916560893759662381e930a%2112000026890754778%21sea

8 vis Dia2mm pour plastique

2 vis M3x15mm + 2 écrous M3 pour la fixation du pied

2 inserts M3 5x5mm https://fr.aliexpress.com/item/32966216550.html?spm=a2g0o.productlist.0.0.4a4214a4UIVaQj&algo_pvid=cf267834-84e8-4501-8af5-36a0244b007f&algo_exp_id=cf267834-84e8-4501-8af5-36a0244b007f-40&pdp_ext_f=%7B%22sku_id%22%3A%2266537111182%22%7D&pdp_npi=2%40dis%21EUR%21%211.98%211.98%21%21%21%21%400b0a187916560904046268463e9314%2166537111182%21sea

1 peu de Fibre optique pour le témoin de charge Dia 2mm (environ 3 cm à placer devant les LED SMD du module de charge) :https://fr.aliexpress.com/item/4001091896029.html?spm=a2g0s.9042311.0.0.27426c37DrQOwj

Dimensions hors tout: 235x75x145mm

Imprimer sans support

Category: Hand Tools

Tags