Opposite side water bottle fixture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fixture for quickly installing an additional water bottle on the opposite side of a bicycle's down tube, in…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a fixture for quickly installing an additional water bottle on the opposite side of a bicycle's down tube, in the case that there's fittings only on the upper side. The print doesn't require support material, and can be fixed securely with some 8mm wide zip ties. I also used electrical tape, and managed to secure it so it couldn't shift about, but be sure to print this with a lot of perimeters, and in a decent material. I used PETG, and will report in if there's any failures, but I think that's unlikely. As I'm installing this on my touring mountain bike, this should go through hell.
You'll need 2-4 M5 nuts for the interior recesses on the "Opposite-side.stl" to provide something to fix an additional bottle cage to.
Category: Sport & Outdoors