Circle Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original version by ZenziWerken was a single .STL, I broke it up into five pieces and added a longer beam.
- Rating
- 4.167 / 5
- Likes
- 82
- Downloads
- 521
- Makes
- 6
- Views
- 3,986
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The original version of this cutter by ZenziWerken was a single .STL file containing all five parts.
Original Circle Cutter - https://www.thingiverse.com/thing:2813236
I saw a few comments asking for individual .STL files for each piece.
So I took the time to separate the parts into individual files and also made a longer version of the beam.
In my remix the end of the beam (parts E & F) has two 2.05mm holes that need to be tapped for a M2.5 screw.
The Blade Holder (Part D) has two 2.5mm diameter holes for the screws to pass through. One holds the blade and the other secures the Blade Holder on the Beam. With my version the blade can be mounted to the inside by flipping the Blade Holder over then cut in the opposite direction.
The longer beam (Part F) is just over 250 mm end to end so should print easily on a Prusa i3 MK3S bed if placed at an angle on the bed.