Stackable Soap Rack
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.61 – €9.30 net (excluding VAT)
For file: stackable_soap_rack_ver0_015mm_pla_mk3s_9h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.45 excluding VAT (range midpoint).
- Weight reported by the author
- 86 g
- Print time reported by the author
- 9.4 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Are you washing your hands a lot lately? You should be! But are you sick of sludgy soap bars?
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 115
- Makes
- 1
- Views
- 847
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Are you washing your hands a lot lately? You should be! But are you sick of sludgy soap bars? This stackable soap rack allows you to leave one bar of soap to dry while using the other.
Printable with minimal support!
Note 2020/03/20: It should work, but it's not tested yet, so I will print and update if necessary.
Print instructions
For the double rack, either use the GCODE (for the i3 MK3S) or print the number indicated at the back of the STL name, e.g. for "stackable_soap_rack_ver0_basin_2x" you should print the part two times. Assemble like shown in the picture (soap not included, obviously).
"Extension" is the only part requiring a little bit of support material.
For the single soap dish, omit the "extension".