1 / 4
"Impossible" Bridging Technique - Print and Flip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model demonstrating complex support-free bridging using mid-print part insertion
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 21
- Makes
- 0
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Print the central and upper shelves first, then the main part with pause points at 34.5mm and 37.5mm (pause just before the shelf begins printing). As it reaches these points, insert the shelves into the ledges. The printer will then print over top, fusing them in place and creating otherwise impossible geometry for support-free printing.
Printed in transparent PLA with 0.8mm external perimeters (0.5mm elsewhere) and 0.3mm layer heights on a 0.4mm nozzle. Should work with most settings.