Fire Extinguisher Pin Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable replacement pin with pull ring for fire extinguishers
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 144
- Makes
- 1
- Views
- 491
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
A 3D printable replacement pin with pull ring for fire extinguishers. I tried it on 3 different model extinguishers and it fit all of them, so it might be kinda universal.
The pin is about an inch long, and about ⅛ of an inch across:
I recommend printing it in PETG or ABS, as PLA might melt or soften in storage of the fire extinguisher or in a situation requiring its use.
I should clarify that this is a replacement for a pin that is lost or broken, but is not intended to allow a fire extinguisher back into service after it has been used. Even if only partially discharged, a used fire extinguisher should be replaced.