aps 870 mk2 shell for CO2 paintball airsoft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
APS CAM870 mk2 shell with standard depth. There is also a 30mm and 40mm depth version in the files section. Test…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 245
- Makes
- 0
- Views
- 1,894
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
APS CAM870 mk2 shell with standard depth.
There is also a 30mm and 40mm depth version in the files section.
Test cycled 20 times and no degradation on the PETG.
Print with your highest temp to strengthen the bonding between layers.
The plastic cover is https://www.printables.com/model/262336-aps-cam-870-shell-plastic-cover
print settings:
No support needed.
PETG
Layer height: 0.15 or 0.10 for better outer quality.
30% infill, any higher is not needed. The strength with PETG is more than enough.
1.2mm bottom layers to give strength.
post processing:
Sand the outside of the shell so it cycles smoothly.
Make sure the bottom ring is no wider than 21mm or it will not cycle well.
The outer dimensions of the model are 1:1 to the original.
Depending on your 3D-printer you may need to scale down/up.
Category: Other