1 / 6
Papučky pre stoličku - Chair slippers — image 1
1 / 6

Papučky pre stoličku - Chair slippers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ochranné papučky (nožičky) pre stoličku

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Náhradne nožičky pre stoličku z trubkových profilov. Povodne nožičky sa prepadli dovnútra a profilová trubka začala škrabať o podlahovú krytinu. Nove nožičky sedia tesne a pevne. Pred nasadením možno bude potrebne obrúsiť hrany profilov pilníkom aby mali jemný nábeh. Predne nožičky majú sklon 13,5 stupňov a zadne 20,5 stupňov. Preto sú k dispozícii dva podobne výtlačky ale pozor líšia sa uhlom náklonu.

Vyplň: 100% , PETG, 0,3mm 

Ak sa ti model páči klikni na srdiečko a ohodnoť hviezdičkami. Ďakujem.

 

Spare legs for a chair made of tubular profiles. The flood legs caved in and the profile pipe began to scrape against the floor covering. The new legs fit tightly and firmly. Before installation, it may be necessary to sand the edges of the profiles with a file so that they have a gentle run-in. The front legs have an inclination of 13.5 degrees and the rear legs 20.5 degrees. Therefore, two similar prints are available, but be careful, they differ in the angle of inclination.

Fill: 100%, PETG, 0.3mm

If you like the model, click on the heart and rate it. Well thank you.

Tags