Advatek PixLite 4 MkII CG1500 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple mount for a Advatek Lighting PixLite MK2 board for a CableGuard CG1500. To connect the PCB to the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple mount for a Advatek Lighting PixLite MK2 board for a CableGuard CG1500.
To connect the PCB to the mounting plate you will need 4 machine screws and nuts. The holes on the mounting plate are 3.5mm in diameter, slightly larger than the 3mm diameter holes on the pix lite PCB. The length of the screws will need to be at least 10 mm long.
To connect the mounting plate to the CG-1500 you will need 4 short appropriately sized wood screws. The diameter of the holes on the mounting plate are 4.5mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Category: Electronics