Snap Fit Peg Concept - Proof of Concept Test Model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.21 net (excluding VAT)
For file: SnapPeg - SnapPegTest_0.2mm_PLA_MK3S_16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Testing a new design for a snap fit peg.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 290
- Makes
- 0
- Views
- 2,315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Update April 9, 2025 : STEP files added.
While creating another print (see below) I got an idea for an improved snap-fit peg, and created this print to try it out. This snap fit incorporates what I believe are some improvements to typical snap fit pegs:
- The peg wall is split in only one place, making for a stronger peg
- The “retainers” on the end of the peg do not encircle the entire peg, but are limited to two small sections
- The peg is “pointed.” This is a very important feature, as it make the peg easier to insert, and also has the effect of “squeezing” the end of the peg making it easier to insert the retainer portion.
This simple test print allows you to try out the concept first hand.
To see my print that gave me this idea, look at the link below - it uses a similar peg and illustrates how the peg in this test print might be used.
https://www.printables.com/model/261785-hot-tubspa-filter-capretainer
As the referenced print illustrates, this design also works without the peg “point,” but the point makes the peg easier to insert.
About the design
While the parameters I used in this test print are not critical, they are at least approximately the relative dimensions that I believe will work well :
- 10mm diameter peg
- 10.2mm diameter hole (a factor of 1.02 larger for clearance)
- “retainer” thickness 0.8mm
- peg “gap” is a 60° arc
- “point” length 4mm
Print Instructions
Print in PLA using the gcode or 3mf files provided.
CAD
The OnShape 3D CAD files for this are here :