1 / 2
Resident Evil 2 and Village Key Wall Holder — image 1
1 / 2

Resident Evil 2 and Village Key Wall Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a wall holder designed to fit replica keys from Resident Evil 2 and Resident Evil Village.

Rating
0 / 5
Likes
42
Downloads
199
Makes
0
Views
3,562
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

Resident Evil 2 and Village Key Wall Holder

This wall holder is designed to hold replicas of the four precinct keys from Resident Evil 2 as well the Six Winged Unborn Key from Resident Evil Village. Examples of the replicas in the picture are:

There is slight curvature for the forks that the precinct keys slide into that helps keep them in place, and the village key should be inserted sideways then turned at which point it won't be able to fall out.

 

Key Dimensions

The upper key prongs are designed for 4.30 mm diameter keys; sufficiently smaller keys may fall through but. The lower key prong (for the Village key) measures 7.88 mm at the opening and then opens up to 16.92 mm afterward.

 

Non-Print Materials Required

This part is designed to be mounted with 3M Command Large Picture Hanging Strips (16 lbs) – just one oriented vertically down the narrow section in the center of the back.

 

Printing Advice

I used the 0.15 mm Quality PrusaSlicer preset to print this. Likely some speedier settings can be used, but I wanted to be confident that the curvature details are expressed since that's part of how the key retention works.

Tags