Universal Optometric Slit Lamp Patient Shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For slit lamps with chin rest strip mounts ~90mm away from each other. You may use a piece of paper, lamination sheet,…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For slit lamps with chin rest strip mounts ~90mm away from each other. You may use a piece of paper, lamination sheet, transparency, or equivalent that is cut to size to act as a barrier for the patient.
Tips are appreciated if this helps you out :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.20-0.30mm. 0.5mm width
Infill:
Doesn't matter
Filament: 3D Printing Canada PETG Carbon Fibre
Notes:
Print at a high temp, turn down extrusion multiplier if the slit becomes fused together.
Best in PETG to allow for some flexibility. The plugs are used for slit lamps that do not have plugs or the original plugs will not fit in the holes of the shield.Category: Parts