Yet another GameCube-Pi

This is yet another GameCube-Pi Case. However it is different to many others.

1. no 3d scan
2. complete design in FreeCAD
3. includes a holder for an SD Card Reader to attach SD cards to the slot where normaly the GameSave cards would have been inserted.
4. Ontop of Raspbery Pi is the DockerPi Power Board mounted, which provides a Fan and Remote Power Switch
5. Ready for Multicolor print on a single color printer

All parts already in the orientation where to print them.

Steps to print multicolor on a single color printer using slicer Cura:

• all parts need to be printed with setting "Build Plate Adhesion Type" "None"
• after each print step, just change material color, do not remove the parts from build plate. Only remove the part from Cura

1. Step - print the gamecube logo - color white
   • load file Gamecube-Pi-Logo.stl
   • position the part at X0 Y0 Z0 on build plate
   • print the part
2. Step - print the disc cover - color black
   • load file Gamecube-Pi-Disc-Deckel.stl
   • position the part at X0 Y0.5 Z0
   • print the part
3. Step - print the black buttons - color black
   • load file Gamecube-Pi-Top-Buttons-schwarz.stl
   • position the part at X0 Y45.5 Z0
   • print the part
4. Step - print the grey button - color grey
   • load the file Gamecube-Pi-Top-Button-Grau.stl
   • postion the part at X45 Y-34,5 Z0
   • print the part
5. Step - print the Top part of the case - color purple
   • load the file Gamecube-Pi-Top-ohne-Logo.stl
   • position the part at X0 Y0 Z0
   • i printed the part without Cura builtin supports, i added just two custom supports at left and right side, with the custom support feature.
   • print the part.

Afterward the top part of the case is complete in mutlicolor :-)

Print front plate with multicolor

1. Step - print the joycons - color black
   • load the file Gamecube-Pi-Joycon.stl
   • duplicate the part 3 times
   • position the parts at
   1 X 34,999 Y-6 Z0

   2 X 11,666 Y-6 Z0

   3 X-11,666 Y-6 Z0

   4 X-34,999 Y-6 Z0

   • print the parts
2. Step - print the front plate - color grey
   • load the file "Gamecube-Pi-Frontplatte.stl
   • position the part at X0 Y0 Z0
   • print the part

Front plate is ready. Now print all the other parts in there color

For the Gamecube-Pi-Card-Reader-Holder.stl i recommend to print it in PETG as PLA, as

PETG is more flexible and usually has a better layer adhesion

Following Party have been used

Docker PI Fan and Remote Power Switch

https://www.amazon.de/gp/product/B07VWQDG81/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

SD Card Reader

https://www.amazon.de/gp/product/B08SW7ZCDM/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Print Settings

Printer Brand:

Ultimaker

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: eSun PLA+, PETG

Category: Video Games