Platform Wall Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wall holder is designed to securely hold items on a horizontal platform.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Platform Wall Holder
This wall holder is designed to hold items on a stable, horizontal platform.
Key Dimensions
The platform measures 132.00 mm width by 110.00 mm depth.
Non-Print Materials Required
This part is designed to be mounted with 3M Command Large Picture Hanging Strips (16 lbs): one on the left side and one on the right oriented vertically. I use this with a number of heavy items such as a Logitech Blue Yeti microphone and figures such as the pictured Miles Morales, but if you want to hold heavier objects I recommend doubling the number of command strips.
When it's fully mounted the command strips should be adhered to the wall, and the bit at the bottom that juts out should be nearly in contact with the wall; this helps prevent the platform from bending downward.
Printing Advice
I printed this with 0.15 mm layer height and with a high-strength (6 perimeters) variant of the Quality preset. In hindsight I think a larger layer height could work. It's very important to print this on its side to make sure layers aren't along the areas of maximum stress.