Vertical Hook Wall Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wall holder is designed to securely hold items that can latch onto a vertical hook.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Vertical Hook Wall Holder
This wall holder is designed to hold items such as sunglasses, masks, key chains, etc that can loop onto a vertical cylindrical hook.
Key Dimensions
The cylindrical hook's diameter is 10.00 mm and there is 11.00. mm clearance between the hook and the start of where it meets the wall.
Non-Print Materials Required
This part is designed to be mounted with a single 3M Command Large Picture Hanging Strips (16 lbs) along its back.
Printing Advice
I printed this with 0.15 mm layer height and with a high-strength (6 perimeters) variant of the Quality preset. In hindsight I think a larger layer height could work, and because it's printed vertically the extra perimeters probably don't offer additional protection against the stresses, so that can probably be relaxed too. Given that this is designed for lightweight items strength probably isn't a huge consideration anyway.