Eraser Head - Goggles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
STL Files for cosplay Eraser Head Goggles. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link:…
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 130
- Makes
- 1
- Views
- 1,120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
STL Files for cosplay Eraser Head Goggles.
Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm
Fusion 360 Link: https://a360.co/2sJKCQU
Extra:
- 1 x 3/8 inch side buckle release. (Strapworks)
- 1 x 1 ft yellow flat nylon webbing 3/8 Inch. (Strapworks)
- 1 x 1 ft elastic band.
Print Settings
Resolution:
0.2
Infill:
20%
Post-Printing
When threading the elastic band make sure the links overlap a bit to ensure that when the bands stretch around the head they line up nicely.
Threading the other end same as the previous side, make sure the links overlap a bit at this point.
Nylon webbed used to link the to goggle part and stitched to keep in place. Used yellow thread as well so the threading won't stand out.
Finally used some thin eva foam (5mm) to line the inside of the goggle to make them feel a bit more comfortable on the face.
Category: 3D Printing