Gear keepers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gear keepers, press fit. Use the stoppers_large.stl (x2) for the large gears and the stoppers_small.stl (x1) for the…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 0
- Views
- 766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Gear keepers, press fit.
Use the stoppers_large.stl (x2) for the large gears and the stoppers_small.stl (x1) for the small gear.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament: X3D PLA Red
Notes:
Print the gears from https://www.thingiverse.com/thing:1702713rnrn- 3gears03_box.STL or 3gears03_box_w_ring.STL x 1rn- 3gears03_g1.STL x 1rn- 3gears03_g2.STL x 1rn- 3gears03_g3.STL x 1rnrnPrint the gear keepers (aka stoppers):rnrn- stoppers_large.stl x 2rn- stoppers_small.stl x 1rnrnAssemble the gears on the box, add the stoppers to prevent the gears from falling off. The stoppers are press-fit so they should stay in place. Use glue if the are not tight enough.rn
Category: Mechanical Toys