1 / 10
Modified X-carve Dust Shoe for cnc4newbie 6" slide — image 1
1 / 10

Modified X-carve Dust Shoe for cnc4newbie 6" slide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Tools
License
Creative Commons — Attribution

This is a modified dust shoe from https://www.thingiverse.com/thing:1892044 . It's modified to fit cnc4newbie's xcarve slider. It uses the same hardware as the original

Here a few more modifications I did:

a) made the brush slots straight. Bending the brushes was giving me too many problems

b) adjusted the dimensions slightly on the top pieces

c) added screw holes on the TOP_back piece to leave room for the drag chain screws

d) sized the dust collector opening for a 3" fitting. I use a 3" to 4" adapter to connect a 4" line

e) changed it from a magnet to a slide in design. I left a slot for 2 magnets in the back, but I didn't bother. I just use pins where the lower bolts used to be, but I left the slot for the nut anyways. Magnets didn't like the weight of a 4" hose anyways.

The sketchup file is attached as well.

Category: Machine Tools

Tags