PDXKBC Macropad Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sci-fi/Cyberpunk style case for the PDXKBC macropad
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 45
- Makes
- 0
- Views
- 820
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is an overdesigned sandwich mount case for the PDXKBC macropad. It was mostly me playing around with keyboard case design and having some fun trying to make something with a sci-fi/cyberpunk aesthetic.
Everything is printable without supports, but the USB cutout can benefit from having them. Either way will likely require a very small amount of post processing for that area.
The case is overall designed for 0.3mm printer tolerances. Please let me know if you have any troubles and I can help adjust the model to better work with your printer.
Holes are sized for M3x6 screws, if the fit is too tight you can use a 2.5mm, 3/32", or 7/64" drill bit to make them larger.
Update 09/18/22
Added an alternate plate that can be used with macropads that have already been made without having to desolder and resolder everything.
Update the case bottom to have accommodate USB-C pro micros that are a little bit longer than standard ones.