Toniebox Wallmount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.58 – €6.82 net (excluding VAT)
For file: Wandhalterung Tonibox v4_0.3mm_PLA_MK3S_4h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.20 excluding VAT (range midpoint).
- Weight reported by the author
- 119 g
- Print time reported by the author
- 4.22 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wallmount for Toniebox with space for the charging station
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 230
- Makes
- 3
- Views
- 1,062
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a wall mount for the children's speakers Toniebox.
The bracket has a bulge for the associated charging station so that the box is flush on the bracket.
Prints well with PLA, but can also be printed with PETG.
Since it is a coarse model I recommend using 0.3mm or even greater layer heights. The optics hardly suffers but the printing time is massively reduced.
The .3mf file contains the model with changed orientation and activated supports to simplify printing.
Added are two .gcodes. One with common settings (0.4mm nozzle) and one created with PrusaSlicer 2.5.0 ALPHA for use with 0.6mm nozzle.
Both have variable layer height.