1 / 1
Aircan straw holder 10x5 magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a redesign with a thicker magnet and the straw closer to the can so it's less easily bumped.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need a 10mm diameter x 5mm thick magnet. It presses in but I would suggest a bit of glue. Gluegun would do the trick.
The thicker 4mm straw works for airduster and the thinner straw works for KEBCO Drilling & Tapping lube.
You could drill out the hole if necessary but that needs to be done with care, would easily break.