Artillery Sidewinder X1 dual Z endstop attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My dual Z endstop attachment bracket for the Sidewinder X1. I wanted the Sensor to be triggered by the exact same…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My dual Z endstop attachment bracket for the Sidewinder X1.
I wanted the Sensor to be triggered by the exact same surface (the 20x60 extrusion) as the first z endstop. There is not much space to achieve this, but it turned out to be a perfect fit.
Once the bracket is attached to the drop in t-nuts, the sensor height can be adjusted to the same level as the original one, without the hassle of the t-nuts falling out of the slot as the bracket prevents them from rotating.
hardware need:
1x aditional sidewinder endstop sensor
3x 10mm M3 bolts
3x 3,2mm washers
1x M3 nut (3x if you use 3d printed t-nuts)
3x 3,2mm washers
2x M3 drop in t-nuts for 6mm slot