Spice Rack (150mm x 150mm x 190mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this spice rack to fit in my cabinet.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 87
- Makes
- 0
- Views
- 866
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
I made this spice rack to fit in my cabinet. It can fit 6 large spice (45mm diameter by 110mm length) containers (typical from Target/other grocery stores) and has two shelves for other odd shaped spice containers. I made it in two parts. The top is just the spice rack, and the bottom has a base and ball bearings so that it can swivel freely.
Print instructions
I suggest printing with detect bridging parameters so that you can print without supports. In addition, I would separate the prints by layers so that the ball bearing slots can be higher resolution. I did most of the spice rack at .3mm layer height. I suggest printing the spice rack horizontally.
The stl files are large because I save them as high tolerance.